Front Wiper Function Select Circuit
Table of contents
B3922 SATURN Possible Causes
- Faulty Turn Signal/Multifunction Switch
- Turn Signal/Multifunction Switch harness is open or shorted
- Turn Signal/Multifunction Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B3922 SATURN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B3922 SATURN code
The cost of diagnosing the B3922 SATURN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B3922 SATURN Description
The Body Control Module (BCM) monitors the windshield wiper switch low signal circuit. When the wiper switch is place in the low position, battery voltage is applied through the switch contacts, a series of resistors, and the wiper switch low signal circuit to the BCM. The BCM then applies battery voltage through the wiper relay control circuit to energize the WPR Relay. When energized, battery voltage from the WPR Fuse is applied through the switch side of the WPR relay then through the switch side of the WPR HI relay to the windshield wiper motor. The Diagnostic Trouble Code (DTC) sets when the BCM detects a short to ground on the windshield wiper switch low signal circuit.