Air Conditioning Evaporator Temperature Sensor Circuit
Table of contents
B3933 SATURN Possible Causes
- Faulty Air Conditioning Evaporator Temperature Sensor
- Air Conditioning Evaporator Temperature Sensor harness is open or shorted
- Air Conditioning Evaporator Temperature Sensor circuit poor electrical connection
- Faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module
How do I fix code B3933 SATURN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B3933 SATURN code
The cost of diagnosing the B3933 SATURN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B3933 SATURN Description
The air temperature sensors are a 2-wire negative temperature coefficient thermistor. This sensor operates using signal and low reference circuits. As the air temperature surrounding the sensor increases, the sensor resistance decreases. The sensor is capable of reading temperatures ranging from -40 to +80°C (-40 to +176°F), with a signal voltage between 0-5 V. If the HVAC control module detects a malfunctioning sensor the software uses a default air temperature value. The default action ensures that the HVAC system can adjust the inside air temperature near the desired temperature until the condition is corrected. The Diagnostic Trouble Code (DTC) sets when the input signal is out of range. The Heating, Ventilation, and Air Conditioning (HVAC) Control Module detects voltage greater than 4.9 V on the temperature signal circuit.