Longitudinal Accelerometer Signal Voltage
Table of contents
C0191 SATURN Possible Causes
- Faulty Yaw Sensor/Lateral Accelerometer Sensor
- Yaw Sensor/Lateral Accelerometer Sensor harness is open or shorted
- Yaw Sensor/Lateral Accelerometer Sensor circuit poor electrical connection
How do I fix code C0191 SATURN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C0191 SATURN code
The cost of diagnosing the C0191 SATURN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0191 SATURN Description
The ignition 1 circuit supplies 12 volts to the longitudinal accelerometer. When the vehicle is not moving, or is being driven at a constant, steady speed, longitudinal acceleration is 0 m/sec/sec (0 ft/sec/sec) and the longitudinal accelerometer signal voltage is very near 2.5 volts. This is referred to as longitudinal accelerometer bias voltage. Vehicle acceleration or deceleration causes the longitudinal accelerometer signal voltage to increase or decrease. The harder the acceleration or deceleration, the greater the change in signal voltage.