Steering Wheel Position Sensor
Table of contents
C0208 SATURN Possible Causes
- Faulty Steering Wheel Position Sensor
- Steering Wheel Position Sensor harness is open or shorted
- Steering Wheel Position Sensor circuit poor electrical connection
How do I fix code C0208 SATURN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C0208 SATURN code
The cost of diagnosing the C0208 SATURN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0208 SATURN Description
The steering wheel position sensor produces 2 separate voltage signals to indicate steering wheel position to the Real Time Damping (RTD) module. The RTD module converts each signal into a Pulse Width Modulated (PWM) signal to indicate steering wheel position to the Electronic Brake Control Module (EBCM). The EBCM supplies 5 volts to the RTD module on each steering wheel position PWM serial data circuit. The RTD module toggles each of these voltages to ground in order to create the PWM signals. Each PWM signal must have a frequency of 121-134 Hz and a duty cycle of 9-91 percent in order to be a valid steering wheel position signal. With each 360 degree rotation of the steering wheel, each signal transitions from the minimum duty cycle to the maximum duty cycle and then back to the minimum duty cycle. The steering wheel position signals are spaced 90 degrees apart. Therefore, the duty cycles of the 2 signals usually differ, depending on steering wheel position.