Electronic Brake Control Module Control Valve Circuit Malfunction
Table of contents
C0241 HUMMER Possible Causes
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module (EBCM) harness is open or shorted
- Electronic Brake Control Module (EBCM) circuit poor electrical connection
How do I fix code C0241 HUMMER?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C0241 HUMMER code
The cost of diagnosing the C0241 HUMMER code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0241 HUMMER Description
The Anti-Lock Brake System (ABS) relay supplies battery voltage to six valve solenoids. The Electronic Brake Control Module (EBCM) microprocessor applies the grounds needed to activate each solenoid. The low side of each solenoid coil has a feedback circuit to the EBCM microprocessor. When a solenoid is commanded OFF, the feedback voltage is high. When a solenoid is commanded ON, the feedback voltage is low.