Engine Drag Control
Table of contents
C0243 CHEVROLET Possible Causes
- Faulty Engine Drag Control (EDC)
- Engine Drag Control (EDC) harness is open or shorted
- Engine Drag Control (EDC) circuit poor electrical connection
How do I fix code C0243 CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C0243 CHEVROLET code
The cost of diagnosing the C0243 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0243 CHEVROLET Description
The Electronic Brake Control Module (EBCM) sends a Engine Drag Control (EDC) request via a dedicated data line. The Powertrain Control Module (PCM) supplies a pull up voltage of 5 volts that the EBCM switches to ground to create the signal. The EBCM receives a serial data message from the PCM indicating that the EDC circuit has failed.
Attractive section of content. I just stumbled upon your web site and in accession capital to assert that
I acquire actually enjoyed account your blog posts. Any way
I will be subscribing to your feeds and even I achievement you access consistently rapidly.
constantly i used to read smaller content which as well clear their motive, and that is
also happening with this post which I am reading at this time.
Heya i’m for the primary time here. I came across this board and I to find
It really helpful & it helped me out much. I hope to provide one thing back and aid others such
as you helped me.
I do not even know the way I ended up here, however I thought this
post used to be great. I do not understand who you’re however certainly you are going to a famous blogger when you are not already.
Cheers!
My programmer is trying to convince me to move to .net from PHP.
I have always disliked the idea because of the costs.
But he’s tryiong none the less. I’ve been using WordPress on a variety of
websites for about a year and am concerned about switching to another platform.
I have heard great things about blogengine.net.
Is there a way I can transfer all my wordpress content into it?
Any help would be greatly appreciated!