Excessive Dump/Isolation Time
Table of contents
C0269 GMC Possible Causes
- Faulty Brake Pressure Modulator Valve (BPMV)
- Brake Pressure Modulator Valve (BPMV) harness is open or shorted
- Brake Pressure Modulator Valve (BPMV) circuit poor electrical connection
How do I fix code C0269 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- If the C0269 code is combined with other codes, fix other codes first.
Cost of diagnosing the C0269 GMC code
The cost of diagnosing the C0269 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0269 GMC Description
The Electronic Brake Control Module (EBCM) microprocessor grounds the dump coil to energize and close the dump valve. This will release the excessive brake pressure which was applied by the driver to the wheels. If the EBCM microprocessor generates a dump command on one or more wheel for greater than nine seconds, the DTC will set.