System Configuration Error Calibration Not Learned
Table of contents
C0569 GMC Possible Causes
- Faulty Transfer Case Shift Control Module (TCCM)
- Transfer Case Shift Control Module (TCCM) harness is open or shorted
- Transfer Case Shift Control Module (TCCM) circuit poor electrical connection
How do I fix code C0569 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C0569 GMC code
The cost of diagnosing the C0569 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0569 GMC Description
This is an internal fault detection of the Transfer Case Shift Control Module (TCCM). No external circuits are involved.
This DTC is set anytime a transfer case control module is replaced or reprogrammed.
The Range Actuator Learn procedure must be performed in order for the transfer case control module to learn current clutch tolerance based on clutch stack-up and accumulated clutch wear.