Damper Control Relay Circuit Range
Table of contents
C0691 GMC Possible Causes
- Faulty Damper Control Relay
- Damper Control Relay harness is open or shorted
- Damper Control Relay circuit poor electrical connection
How do I fix code C0691 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C0691 GMC code
The cost of diagnosing the C0691 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0691 GMC Description
Battery voltage for the strut actuators is supplied to the Electronic Suspension Control (ESC) module through the damper drive relay circuit. The ESC module energizes the damper relay by opening and closing an internal ground for the damping relay coil control circuit. The ESC module monitors the damper drive relay circuit and each strut actuator high-side and low-side drive circuits for fault conditions.