Level Control Compressor Overtemperature
Table of contents
C0713 HUMMER Possible Causes
- Faulty Level Control Compressor
- Level Control Compressor harness is open or shorted
- Level Control Compressor circuit poor electrical connection
How do I fix code C0713 HUMMER?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C0713 HUMMER code
The cost of diagnosing the C0713 HUMMER code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0713 HUMMER Description
The air suspension compressor has a temperature sensor. The overtemperature sensor is a thermal limit switch that is in the normally closed position. This provides a ground signal to the air suspension module. The air suspension module monitors the temperature sensor for a compressor overtemperature condition. On receipt of a compressor overtemperature condition the air suspension module switches off the compressor relay. The relay cannot be switched on again until at least 3 minutes after removal of the overtemperature condition.