Brake Pedal Switch 1 Circuit Performance
Table of contents
C1000 JEEP Possible Causes
- Faulty Brake Pedal Switch 1
- Brake Pedal Switch 1 harness is open or shorted
- Brake Pedal Switch 1 circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How do I fix code C1000 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1000 JEEP code
The cost of diagnosing the C1000 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1000 JEEP Description
The Totally Integrated Power Module (TIPM) monitors the Primary Brake Switch Signal Circuit Brake Lamp Switch Output Circuit for three minutes once the set conditions have been met. If the Primary Brake Switch Signal is still active, the stop lamps are disabled, and code C1000 is set. The stop lamps are reactivated when the request is present during the next key cycle.