Brake Fluid Level Input Circuit Short To Battery Or Open
Table of contents
C1006 JEEP Possible Causes
- Faulty Brake Fluid Level Switch
- Brake Fluid Level Switch harness is open or shorted
- Brake Fluid Level Switch circuit poor electrical connection
How do I fix code C1006 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1006 JEEP code
The cost of diagnosing the C1006 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1006 JEEP Description
The Body Control Module (BCM) provides a reference voltage on the brake fluid level signal circuit through a pull-up resistor that is connected to battery voltage. The Brake Fluid Level Switch switches the brake fluid level signal circuit to ground when the fluid level is low. A diagnostic resistor internal to the switch is placed in parallel with the switch.