Right Front Inlet Solenoid Circuit Failure
Table of contents
C1041 SUZUKI Possible Causes
- Faulty Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP®) Control Module
- ABS / ESP® Control Module harness is open or shorted
- ABS / ESP® Control Module circuit poor electrical connection
How do I fix code C1041 SUZUKI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1041 SUZUKI code
The cost of diagnosing the C1041 SUZUKI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1041 SUZUKI Description
The Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP®) Control Module monitors the output from the solenoid valve. When the output of each solenoid valve exceeds the specified value compared with the signal sent from ABS (ESP®) control module, this Diagnostic Trouble Code (DTC) is set.