Right Rear Wheel Pressure Phase Monitoring
Table of contents
C1049 JEEP Possible Causes
- Dirty Right Rear Tone Wheel
- Dirty Right Rear Wheel Speed Sensor (WSS)
- Faulty Right Rear Wheel Speed Sensor (WSS)
- Right Rear Wheel Speed Sensor (WSS) harness is open or shorted
- Right Rear Wheel Speed Sensor (WSS) circuit poor electrical connection
- Damage Right Rear Tone Wheel
- Faulty Anti-Lock Brake System (ABS) Module
How do I fix code C1049 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1049 JEEP code
The cost of diagnosing the C1049 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1049 JEEP Description
The Anti-Lock Brake System (ABS) Module monitors the Right Rear Wheel Pressure Phase. The ABS Module sets the OBDII if the ABS Module detects a pressure reduction phase and the following pressure hold phase is too long.