ABS/ESP Control Module Power Supply Circuit Failure
Table of contents
C1057 SUZUKI Possible Causes
- Faulty Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP®) Control Module
- ABS / ESP® Control Module harness is open or shorted
- ABS / ESP® Control Module circuit poor electrical connection
How do I fix code C1057 SUZUKI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1057 SUZUKI code
The cost of diagnosing the C1057 SUZUKI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1057 SUZUKI Description
The Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP®) Control Module monitors the power source voltage. When the power source voltage becomes extremely high or low while vehicle is running at more than 20 km/h (13 MPH), this DTC will be set. As soon as the power source voltage becomes normal, the ABS warning light will be turned off and the ABS (ESP®) control module will return to normal operation, but the set DTC will be remain.