Solenoid Valve Power Supply Driver Circuit Failure
Table of contents
C1063 SUZUKI Possible Causes
- Faulty Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP®) Control Module
- ABS / ESP® Control Module harness is open or shorted
- ABS / ESP® Control Module circuit poor electrical connection
How do I fix code C1063 SUZUKI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1063 SUZUKI code
The cost of diagnosing the C1063 SUZUKI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1063 SUZUKI Description
The Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP®) Control Module monitors the voltage at the terminal of solenoid circuit constantly with ignition switch turned ON. Also, immediately after ignition switch is turned ON, perform initial check as follows. Switch solenoid valve power supply driver (transistor) in the order of OFF → ON and check if voltage changes to Low → High. If anything faulty is found in the initial check and when the voltage is low with ignition switch turned ON, this DTC will be set.