Longitudinal G Sensor In Yaw Rate/G Sensor Assembly Calibration Incomplete
Table of contents
C1077 SUZUKI Possible Causes
- Calibrate Longitudinal G Sensor In Yaw Rate/G Sensor Assembly
- Faulty Longitudinal G Sensor In Yaw Rate/G Sensor Assembly
- Longitudinal G Sensor In Yaw Rate/G Sensor harness is open or shorted
- Longitudinal G Sensor In Yaw Rate/G Sensor circuit poor electrical connection
- Faulty Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP®) Control Module
How do I fix code C1077 SUZUKI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1077 SUZUKI code
The cost of diagnosing the C1077 SUZUKI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1077 SUZUKI Description
The Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP®) Control Module monitors the Longitudinal G Sensor In Yaw Rate/G Sensor. The ABS / ESP® Control Module sets the OBDII code when the Longitudinal G Sensor In Yaw Rate/G Sensor is not to factory specifications.