Side G Sensor Circuit
Table of contents
C1146 NISSAN Possible Causes
- Faulty Yaw Rate/Side G Sensor
- Yaw Rate/Side G Sensor harness is open or shorted
- Yaw Rate/Side G Sensor circuit poor electrical connection
How do I fix code C1146 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1146 NISSAN code
The cost of diagnosing the C1146 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
Side G sensor is malfunctioning, or circuit of side G sensor is open or shorted.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1146 NISSAN Description
The Yaw Rate/Side/Decel G sensor detects the Yaw Rate/Side/Decel G affecting the vehicle and transmits the data to the Anti-Lock Brake System (ABS) Actuator And Electric Unit (Control Unit) as an analog voltage signal. The ABS Actuator And Electric Unit monitor the Side G Sensor. The ABS Module sets the OBDII code when the Side G Sensor is not to factory specifications.