Incomplete Pressure Sensor Calibration
Table of contents
C1162 NISSAN Possible Causes
- Faulty ABS Actuator and Electric Unit
- ABS Actuator and Electric Unit harness is open or shorted
- ABS Actuator and Electric Unit circuit poor electrical connection
How do I fix code C1162 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1162 NISSAN code
The cost of diagnosing the C1162 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1162 NISSAN Description
The pressure sensor converts the brake fluid pressure to an electric signal and transmits it to the Anti-Lock Brake System (ABS) Actuator and Electric Unit (Control Unit). [The pressure sensor is integrated in the ABS Actuator and Electric Unit.] The ABS Actuator and Electric Unit monitors the Incomplete Pressure Sensor. The ABS Actuator and Electric Unit set the OBDII code when the Incomplete Pressure Sensor is not to factory specifications.