Cut Valve 1
Table of contents
C1164 NISSAN Possible Causes
- Faulty Anti-Lock Brake System (ABS) Actuator and Electric Unit (Control Unit)
- ABS Actuator and Electric Unit harness is open or shorted
- ABS Actuator and Electric Unit circuit poor electrical connection
How do I fix code C1164 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1164 NISSAN code
The cost of diagnosing the C1164 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
Front side VDC switch-over solenoid valve (cut valve 1) is open or shorted, or control line is open or shorted to power supply or ground.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1164 NISSAN Description
The cut valve shuts off the normal brake fluid path from the master cylinder, when VDC/TCS is activated. The Anti-Lock Brake System (ABS) Actuator and Electric Unit (Control Unit) monitors the Cut Valve. ABS Actuator and Electric Unit sets the OBDII code when the Cut Valve is not to factory specifications.