Abnormality In FL/RR Wheel Suction Valve System
Table of contents
C1208 MITSUBISHI Possible Causes
- Faulty Anti-Lock Brake System (ABS) Electronic Control Unit (ECU)
- ABS-ECU harness is open or shorted
- ABS-ECU circuit poor electrical connection
How do I fix code C1208 MITSUBISHI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1208 MITSUBISHI code
The cost of diagnosing the C1208 MITSUBISHI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1208 MITSUBISHI Description
The Anti-Lock Brake System (ABS) Electronic Control Unit (ECU) the power supply circuit for the solenoid valve. The solenoid valve is energized by the valve relay, which is incorporated in ABS-ECU. The valve relay, which is incorporated in ABS-ECU, is always energizing the solenoid valve unless the initial check is in progress when the ignition switch is turned on, or the recurrent system check is in progress. ABS-ECU activates the solenoid valve by turning on its driving transistor.