Wheel Speed Right Rear Signal Fault
Table of contents
C1298 MERCURY Possible Causes
- Wheel Speed Sensor Ring
- Faulty Wheel Speed Sensor
- Wheel Speed Sensor harness is open or shorted
- Wheel Speed Sensor circuit poor electrical connection
- Faulty Anti-Lock Brake System (ABS) Module
How do I fix code C1298 MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Incorrect tire size or tire pressure can set these DTCs as well. DTCs set in the ignition cycle can only be cleared by cycling the ignition off and on once the fault has been corrected.
Cost of diagnosing the C1298 MERCURY code
The cost of diagnosing the C1298 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1298 MERCURY Description
The wheel speed sensor and sensor ring generate a square wave signal to the Anti-Lock Brake System (ABS) Module that is proportional to wheel speed. The ABS module compares wheel speed inputs from all wheel speed sensors to determine an impending wheel lockup. The ABS Module monitors the Wheel Speed Sensor. The ABS Module sets the OBDII code when the Wheel Speed Sensor is not to factory specifications.