Steering Wheel Angle Sensor Zero Position Not Found
Table of contents
C1306 MAZDA Possible Causes
- Improper installation or positioning of the steering angle sensor
- Faulty Steering Angle Sensor
- Steering Angle Sensor harness is open or shorted
- Steering Angle Sensor circuit poor electrical connection
How do I fix code C1306 MAZDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1306 MAZDA code
The cost of diagnosing the C1306 MAZDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1306 MAZDA Description
The steering wheel rotation (in degrees) is sent to the Anti-Lock Brake System (ABS) module. Voltage is supplied to the steering wheel angle sensor from the ABS module and ground is provided by the ABS module. The steering wheel rotation sensor monitor the steering wheel position when the slotted wheel in the clockspring assembly rotates through the infrared light generated by the sensor.