Performance Decline Of Brake Function
Table of contents
C1441 TOYOTA Possible Causes
- Faulty Brake Pedal Load Sensing Switch
- Faulty Brake Booster Assembly
- Faulty Skid Control ECU
How do I fix code C1441 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Some 2015 model year Camry vehicles equipped with the 2AR-FE engine may exhibit an intermittent service brake warning light ON condition and stored Diagnostic Trouble Code (DTC) C1441. Customers may also notice the light will illuminate as the vehicle is being started, and some customers may notice a noise or feeling similar to the ABS activating during normal braking. The Brake Booster has been updated to address this condition.
Cost of diagnosing the C1441 TOYOTA code
The cost of diagnosing the C1441 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1441 TOYOTA Description
The Skid Control ECU monitors the Brake Pedal Load Sensing Switch and Master Cylinder Pressure Sensor. The Skid Control ECU judges brake failure conditions have occurred based on signals from the Brake Pedal Load Sensing Switch and Master Cylinder Pressure Sensor.