4WAS Lock Insertion
Table of contents
C1667 NISSAN Possible Causes
- Faulty 4WAS Front Actuator
- 4WAS Front Actuator harness is open or shorted
- 4WAS Front Actuator circuit poor electrical connection
How do I fix code C1667 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1667 NISSAN code
The cost of diagnosing the C1667 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1667 NISSAN Description
The 4 Wheel Active Steer (4WAS) front lock solenoid valve (lock structure) is controlled by the 4WAS front control unit, and locks/unlocks 4WAS Front Actuator. If a strong force (rotation direction) is applied to the 4WAS front actuator, the locking mechanism (holder) absorbs the force and locks 4WAS front actuator. The front wheel steering angle sensor detects a turning angle of the 4WAS front motor. 4WAS front motor controls the number of revolutions by a command value from the 4WAS front control unit. Gear shaft is an output axis of the 4WAS front motor. (Gear shaft = 4WAS front motor revolution + steering angle) Spiral cables mean the power line and signal lines of the 4WAS front motor.