High Pressure Malfunction In Upside Of KDSS System
Table of contents
C1853 TOYOTA Possible Causes
- Faulty Accumulator pressure sensor or stabilizer control solenoid valve
- Accumulator pressure sensor or stabilizer control solenoid valve harness is open or shorted
- Accumulator pressure sensor or stabilizer control solenoid valve circuit poor electrical connection
- Faulty Stabilizer Control ECU
How do I fix code C1853 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C1853 TOYOTA code
The cost of diagnosing the C1853 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1853 TOYOTA Description
In the Kinetic Dynamic Suspension System (KDSS) hydraulic circuit, the fluid is contained under pressure. If the fluid temperature is 20°C (68°F), the pressure is approximately 3.0 MPa (30.6 kgf/ cm2, 435 psi). The Stabilizer Control ECU sets the OBDII code when the fluid pressure is not to factory specifications.