Left Motor
Table of contents
C2008 MERCURY Possible Causes
- Faulty
- harness is open or shorted
- circuit poor electrical connection
How do I fix code C2008 MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- C2008:13 Left Motor: Circuit Open
- C2008:1C Left Motor: Circuit Voltage Out of Range
- C2008:92 Left Motor: Performance or Incorrect Operation
- C2008:96 Left Motor: Component Internal Failure
Cost of diagnosing the C2008 MERCURY code
The cost of diagnosing the C2008 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C2008 MERCURY Description
When the Anti-Lock Brake System (ABS) Module receives a parking brake apply or release request, the ABS module sends voltage to the parking brake actuator motors. The ABS module also monitors the current draw of the actuator motors to determine when the brake pads contact the brake disc, to determine when the appropriate amount of clamping force is being applied to the brake disc and to determine when the brake pads are retracted to their start position.
The ABS module runs self-tests before, during and after an apply or release request. These self-tests are done to determine parking brake system functionality. High actuator motor circuit resistance, a short to ground, a short to voltage, an open circuit, a mechanical or electrical failure of the actuator motor or an internal failure of the ABS module may cause one or more of these self-tests to fail resulting in the ABS module setting one or more Diagnostic Trouble Codes (DTCs).