Steering Shaft Torque Sensor 1
Table of contents
C200B MERCURY Possible Causes
- Faulty Steering Shaft Torque Sensor 1
- Steering Shaft Torque Sensor 1 harness is open or shorted
- Steering Shaft Torque Sensor 1 circuit poor electrical connection
How do I fix code C200B MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C200B MERCURY code
The cost of diagnosing the C200B MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
C200B MERCURY Description
The Power Steering Control Module (PSCM) monitors various inputs and outputs of the Electric Power-Assisted Steering (EPAS) system in order to keep the system operating at peak capacity. Information provided by sensors (steering torque, vehicle speed, vehicle travel distance, etc.) are all compared to programmed and learned information. Likewise, outputs like the motor and steering rack (travel) are tested against programmed and learned information. The Diagnostic Trouble Code (DTC) will set when the PSCM detects a Steering Shaft Torque Sensor 1 Failure.