Transmitter ID 1 Operation Stop
Table of contents
C2111 TOYOTA Possible Causes
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning ECU
How do I fix code C2111 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C2111 TOYOTA code
The cost of diagnosing the C2111 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Tire Pressure Monitor System (TPMS) Warning Light ON
- Anti-Lock Brake System (ABS) Warning Light ON
C2111 TOYOTA Description
The Tire Pressure Warning Valves and transmitters that are installed in the tire and wheel assemblies measure the tire pressures of the tires. The measured values are transmitted to the tire pressure warning antenna and receiver on the body as radio waves and then sent to the Tire Pressure Warning ECU. The ECU compares the measured tire pressure values with the tire pressure threshold. When the measured tire pressure value is less than this threshold, the warning light in the combination meter turns on. The Tire Pressure Warning ECU stores a Diagnostic Trouble Code (DTC) when the tire pressure warning valve and transmitter stops transmitting signals. The stored DTC is cleared when the signal transmission is resumed.