Electric Power Steering Module Not Initialized
Table of contents
C221F RAM Possible Causes
- Electric Power Steering (EPS) Not Initialized
- Faulty Electric Power Steering (EPS)
- Electric Power Steering (EPS) harness is open or shorted
- Electric Power Steering (EPS) circuit poor electrical connection
How do I fix code C221F RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C221F RAM code
The cost of diagnosing the C221F RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C221F RAM Description
The Steering Angle Sensor is not Calibrated and or the Electric Power Steering (EPS) Module is not initialized, this Diagnostic Trouble Code (DTC) will set. Most of the internal faults that can set this DTC will result in the EPS assist not operating for the remainder of the current ignition cycle.