Motor Current Overflow
Table of contents
C2413 HYUNDAI Possible Causes
- Faulty Electronic Power Steering (EPS) Motor
- Electronic Power Steering (EPS) Motor harness is open or shorted
- Electronic Power Steering (EPS) Motor circuit poor electrical connection
- Faulty Electronic Power Steering (EPS) Control Module
How do I fix code C2413 HYUNDAI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C2413 HYUNDAI code
The cost of diagnosing the C2413 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C2413 HYUNDAI Description
An operating motor is used to support the driving force of steering wheel when the wheel is turned (rotated) by the driver. The operating motor (a brush type DC motor) is installed in the middle of the steering column and operates the steering column. The Electronic Power Steering (EPS) Motor can be damaged during disassembly or removal of the operating motor, so you must disassemble or remove the EPS motor with the assembly. This Diagnostic Trouble Code (DTC) code refers to open/shorts or faulty connections in the EPS Control Module circuit. This code is set if while monitoring control current and real current, in the EPS motor circuit, the difference between two values is over 10A.