Motor Current Insufficient Flow
Table of contents
C2415 HYUNDAI Possible Causes
- Faulty Electronic Power Steering (EPS) Motor
- Electronic Power Steering (EPS) Motor harness is open or shorted
- Electronic Power Steering (EPS) Motor circuit poor electrical connection
- Faulty Electronic Power Steering (EPS) Control Module
How do I fix code C2415 HYUNDAI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C2415 HYUNDAI code
The cost of diagnosing the C2415 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C2415 HYUNDAI Description
An operating motor is used to support the driving force of steering wheel when the wheel is turned (rotated) by the driver. The operating motor (a brush type DC motor) is installed in the middle of the steering column and operates the steering column. The Electronic Power Steering (EPS) Motor can be damaged during disassembly or removal of the operating motor, so you must disassemble or remove the EPS motor with the assembly. This Diagnostic Trouble Code (DTC) code refers to failure or insufficient current, in motor, during EPS Control Module control of the motor. This code is set if current under 2A is detected, in the motor, due to open/short of EPS motor control harness, faulty contact or short in motor inside.