Motor Temperature Sensor High Input
Table of contents
C2420 HYUNDAI Possible Causes
- Contamination of Oil/Clog of Oil path
- Faulty Motor Pump Unit (MPU)
- Motor Pump Unit (MPU) harness is open or shorted
- Motor Pump Unit (MPU) circuit poor electrical connection
How do I fix code C2420 HYUNDAI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C2420 HYUNDAI code
The cost of diagnosing the C2420 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C2420 HYUNDAI Description
The Electro Hydraulic Power Steering (EHPS) is assistance steering ability system uses an electrical motor that generates oil pressure not to use the Engine power. The Temperature Sensor is installed in the Motor Pump Unit (MPU) in order to measure oil temperature, This sensor uses a thermistor whose resistance changes according to the temperature changes. The MPU ECU perform limit current control to prevent from over-heating and motor speed control according to viscosity changes. This Diagnostic Trouble Code (DTC) code is set when supplied over current or input too high temperature to MPU ECU, in order to protect MPU ECU. The MPU not perform EHPS control.