Power Steering Motor Circuit Short To Battery
Table of contents
C2792 MERCURY Possible Causes
- Faulty Power Steering Control Module
- Power Steering Control Module harness is open or shorted
- Power Steering Control Module circuit poor electrical connection
- Intermediate shaft U-joints
- Steering column bearings
- Ball Joints
- Strut bearings
- Steering gear
How do I fix code C2792 MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the C2792 MERCURY code
The cost of diagnosing the C2792 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C2792 MERCURY Description
The Power Steering Control Module receives the voltage to ground through the circuit. The Power Steering Control Module sends power to the torque sensor and provides a ground path for the torque sensor. The Power Steering Control Module receives signals from the torque sensor, which is dependent upon the torque being requested by the steering input. The Power Steering Control Module sends varying amperage dependent upon the desired output of the power steering control module. The Power Steering Control Module sets the OBDII code when the Power Steering Motor is not to factory specifications.