Variable Control Timing Oil Control Solenoid Valve Malfunction
Table of contents
P0010 HONDA Possible Causes
- Dirty Oil
- Low engine oil level
- Valve Timing Control (VTC) open or shorted circuit.
- Valve Timing Control (VTC) electrical connector
- Faulty Valve Timing Control (VTC)
- Damaged ECM
How do I fix code P0010 HONDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0010 HONDA code
The cost of diagnosing the P0010 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of power
- Engine rough idle
P0010 HONDA Description
The Engine Control Module (ECM) optimizes the valve timing using the Valve Timing Control (VTC). The ECM sends a target duty cycle control signal to the VTC. This control signal regulates the oil pressure supplied to the VTC. The VTC can advance or retard the engine timing.