Bank 1 Camshaft 2 Position Actuator Circuit Open
Table of contents
P0013 JEEP Possible Causes
- Faulty Variable Cam Timing (VCT) solenoid
- Variable Cam Timing solenoid circuit is open or shorted
- Variable Cam Timing solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How do I fix code P0013 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0013 JEEP code
The cost of diagnosing the P0013 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0013 JEEP Description
Variable Cam Timing (VCT) allows the Powertrain Control Module (PCM) to monitor and adjust the position of the camshaft, based on desired torque levels and engine operating conditions. The camshaft design allows for the exhaust lobes to be adjusted while the intake lobes are not adjustable all on one camshaft. The PCM controls a solenoid operated control valve, which is used to direct oil pressure to a hydraulic actuator mounted between the camshaft and its driving sprocket. The oil pressure alters the angular position or phasing of the camshaft relative to crankshaft rotation. A sensor is used to monitor the position of the camshaft.
The Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module detects that the actual voltage of the VCT solenoid control circuit does not match the intended state. One Trip Fault. Three good trips to turn off the MIL.