Crankshaft Position – Camshaft Position Correlation – Bank 1 Sensor ‘B’
Table of contents
P0017 MERCURY Possible Causes
- Camshaft timing incorrectly set
- Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- VCT solenoid stuck in position
- Faulty Variable Camshaft Timing
- Variable Camshaft Timing harness is open or shorted
- Variable Camshaft Timing circuit poor electrical connection
- Damaged camshaft position (CMP) sensor
- Open or short in the CMP sensor circuits
- Radio frequency interference (RFI) interference
How do I fix code P0017 MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0017 MERCURY code
The cost of diagnosing the P0017 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0017 MERCURY Description
The Powertrain Control Module (PCM) monitors the Variable Camshaft Timing (VCT) position for a misalignment between the camshaft and crankshaft. The test fails when the misalignment is 1 tooth or greater. This Diagnostic Trouble Code (DTC) can also set due to VCT system concerns (oil contamination or VCT solenoid stuck).