Crankshaft And Camshaft Timing ‘B’ System Failure Bank 1
Table of contents
P0017 SUBARU Possible Causes
- Low or Dirty Engine Oil
- Faulty Oil Flow Control Solenoid
- Oil Flow Control Solenoid harness is open or shorted
- Oil Flow Control Solenoid circuit poor electrical connection
- Camshaft Phaser/Sprocket
How do I fix code P0017 SUBARU?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0017 SUBARU code
The cost of diagnosing the P0017 SUBARU code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0017 SUBARU Description
The Active Valve Control System (AVCS) varies camshaft timing by changing the camshaft phase angle depending on engine load in order to increase engine performance and efficiency and lower emission levels. The Engine Control Module (ECM) controls the oil flow control solenoids, mounted on the valve cover of each cylinder head, which acts upon the spool valves to adjust oil pressure flow to the desired chamber inside the camshaft-phasers. The Diagnostic Trouble Code (DTC) sets if the ECM detects the exhaust advance value is out of specifications.