HO2S Heater Control Circuit High Bank 1 Sensor 1
Table of contents
P0032 MERCEDES-BENZ Possible Causes
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 harness is open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How do I fix code P0032 MERCEDES-BENZ?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Mercedes Benz Code = 0441 (Right O2 sensor, before TWC): Short circuit to positive (P0032)
Cost of diagnosing the P0032 MERCEDES-BENZ code
The cost of diagnosing the P0032 MERCEDES-BENZ code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0032 MERCEDES-BENZ Description
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM). In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
This fault code is stored in the engine control module when the control circuit for the exhaust gas oxygen sensor heater circuit does not perform as expected. The engine control module can calculate the current flow through the heater circuit to monitor circuit condition.