1/2 And 2/2 O2 Sensor Harness Connectors Reversed
Table of contents
P0041 JEEP Possible Causes
- 1/2 And 2/2 O2 sensors harness is open or shorted
- 1/2 And 2/2 O2 sensors circuit connectors (wrong connection)
- Faulty Powertrain Control Module (PCM)
How do I fix code P0041 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0041 JEEP code
The cost of diagnosing the P0041 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0041 JEEP Description
At ignition on the Powertrain Control Module (PCM) checks the voltage on the ground side of the O2 sensor harness connector. If voltage is higher than two volts the P0041 code will set.