Turbocharger/Supercharger Boost Control ‘B’ Module Performance
Table of contents
P00B0 DODGE Possible Causes
- Faulty Electronic Turbo actuator
- Electronic Turbo actuator harness is open or shorted
- Electronic Turbo actuator circuit poor electrical connection
How do I fix code P00B0 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P00B0 DODGE code
The cost of diagnosing the P00B0 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P00B0 DODGE Description
The Variable Geometry Turbocharger (VGT) is electronically activated by the Electronic Turbo actuator. The Electronic Turbo actuator is a smart device and receives information from the Engine Control Module (ECM). The Electronic Turbo actuator performs its own diagnostics and reports failures back to the ECM. The ECM then decodes the error message and converts it to a fault code. This fault code is logged when the Electronic Turbo actuator detected an internal error within the Electronic Turbo actuator. The Electronic Turbo actuator will stop controlling the turbocharger when this fault code is active. The ECM lights the MIL lamp after the diagnostic runs and fails in two consecutive drive cycles. The ECM turns off the MIL lamp after the diagnostic runs and passes in 4 consecutive drive cycles