O2 Sensor Circuit Malfunction Bank 2 Sensor 1
Table of contents
- Possible Causes
- How To Fix
- Tech Notes
- Cost To Diagnose
- When is the code detected
- Possible Symptoms
- Description
P0150 FORD Possible Causes
- Faulty Front Heated Oxygen Sensor Bank 2
- Front Heated Oxygen Sensor Bank 2 harness is open or shorted
- Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How do I fix code P0150 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Replacing the O2 Sensor 1 usually takes care of the problem.
- There is a Factory Service Bulletin for the 2009-2010 Ford F-150:
- 2009-2010 Ford F-150 Factory Service Bulletin OBDII Code P0150
Cost of diagnosing the P0150 FORD code
The cost of diagnosing the P0150 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The response of the voltage signal from the sensor takes more than the specified time.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
P0150 FORD Description
The powertrain control module (PCM) monitors the heated oxygen sensor (HO2S) for a circuit concern. The test fails when the PCM detects a concern with one of the circuits used to determine the oxygen content in the exhaust gas.