Engine Overspeed Condition
Table of contents
P0219 MAZDA Possible Causes
- Wheel slippage (water, ice, mud, and snow)
- Excessive engine RPM in NEUTRAL or operated in the wrong transmission gear.
- Engine over-rev condition
- Faulty Crankshaft position sensor
How do I fix code P0219 MAZDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0219 MAZDA code
The cost of diagnosing the P0219 MAZDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0219 MAZDA Description
Indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit. The engine RPM is continuously monitored and evaluated by the PCM. The DTC is set when the RPM exceeds the calibrated limit set within the PCM. For additional information on the engine RPM limiter, refer to Section 1, Electronic Engine Control (EC) System Powertrain Control Software.