Fuel Injector 11 Performance
Table of contents
P021E DODGE Possible Causes
- Faulty Fuel Injector 11
- Fuel Injector 11 harness is open or shorted
- Fuel Injector 11 circuit poor electrical connection
- Faulty Crankshaft or Camshaft Position Sensor
How do I fix code P021E DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P021E DODGE code
The cost of diagnosing the P021E DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine misfiring
- Reduced fuel efficiency
P021E DODGE Description
The Powertrain Control Module (PCM) can detect when unintended fuel injection occurs by monitoring fuel rail pressure and engine speed. If this condition occurs, the engine will typically die and not start. There will be exhaust smoke during cranking and no fuel rail pressure will be developed during cranking. This Detected Trouble Code (DTC) will be active during cranking if this condition exists. Progressive cylinder damage may occur if the engine is operated for an extended period of time with this condition. This fault code is logged when the PCM determines that unintended fuel injection has occurred. The PCM sets the OBDII code when determines that unintended fuel injection has occurred.