Turbocharger Engine Underboost
Table of contents
P0299 ISUZU Possible Causes
- Induction air leakage
- Sticking turbocharger nozzle control solenoid
- Low fuel pressure condition
- Faulty boost pressure sensor
How do I fix code P0299 ISUZU?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0299 ISUZU code
The cost of diagnosing the P0299 ISUZU code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0299 ISUZU Description
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. The pressure in the intake manifold is affected by turbocharging output, engine speed, accelerator pedal input, ambient air temperature, and Barometric Pressure (BARO). A diaphragm within the MAP pressure sensor is displaced by the pressure changes that occur from the varying load and operating conditions of the engine. Under normal operation, then the lowest pressure that can exist in the intake manifold is equal to the BARO. This occurs when the vehicle is operated at idle or when the ignition is ON while the engine is OFF. The highest manifold pressure occurs when the turbocharger output is high. The manifold pressure range from 58 kPa (8 psi) when pressure are low to more than 296 kPa(42.7 psi) when pressures are high, depending on the BARO.