EVAP Emission System Purge Control Valve Circuit Shorted
Table of contents
P0445 KIA Possible Causes
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control Valve
- Evaporative Emission (EVAP) Purge Solenoid Control Valve harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control Valve circuit poor electrical connection
How do I fix code P0445 KIA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0445 KIA code
The cost of diagnosing the P0445 KIA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
– An excessively high voltage signal is sent to Engine Control Module (ECM) through the valve
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0445 KIA Description
The Evaporative Emission Control System (EVAP) prevents hydrocarbon (HC) vapors from the fuel tank from escaping into the atmosphere where they could form photochemical smog. Gasoline vapors are collected in the charcoal canister. The Engine Control Module (ECM) controls the Purge Control Solenoid Valve (PCSV) to purge any collected vapors from the canister back to the engine for combustlon. This valve is actuated by the purge control signal from the ECM and controls fuel vapor flow from the canister to the intake manifold.