Cold Start Engine Exhaust Temperature Too Low
Table of contents
P050E NISSAN Possible Causes
- Lack of intake air volume
- Faulty Fuel injection system
- Faulty Engine Control Module (ECM)
How do I fix code P050E NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P050E NISSAN code
The cost of diagnosing the P050E NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The temperature of the catalyst inlet does not rise to the proper temperature when the engine is started with pre-warming up condition.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P050E NISSAN Description
The Engine Control Module (ECM) controls ignition timing and engine idle speed when engine is started with pre-warming up condition. This control promotes the activation of three way catalyst by heating the catalyst and reduces emissions.