Cold Start ‘A’ Camshaft Position Timing Over-Advanced Bank 2
Table of contents
P052C BMW Possible Causes
- Faulty Continuously Variable Valve Timing Solenoid
- Continuously Variable Valve Timing Solenoid harness is open or shorted
- Continuously Variable Valve Timing Solenoid circuit poor electrical connection
- Mechanical Defect
- Valve Timing
How do I fix code P052C BMW?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P052C BMW code
The cost of diagnosing the P052C BMW code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P052C BMW Description
To assist with cold start conditions the camshaft timing can be adjusted to allow for optimum starting conditions. This Diagnostic Trouble Code (DTC) will set when the Engine Control Module (ECM) is unable to control the actuator correctly. Oil pressure and quality should be tested before any electrical fault finding is carried out.