System Voltage Malfunction
Table of contents
P0560 LAND-ROVER Possible Causes
- Low battery charge
- Battery defective
- Loose or missing alternator drive belt
- Faulty alternator
- Open or short system voltage circuit
How do I fix code P0560 LAND-ROVER?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Start by recharging or replacing the battery.
Cost of diagnosing the P0560 LAND-ROVER code
The cost of diagnosing the P0560 LAND-ROVER code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Slow engine start
- Low battery power
P0560 LAND-ROVER Description
This fault code is stored in a control module when the battery voltage is not as expected. The voltage can be higher or lower than required by the system. The control module can monitor the supply voltage and log a fault code accordingly. A module can shut down if the battery voltage passes a certain threshold voltage. The low supply voltage can cause the applied current flow to increase which can damage sensitive electronic circuits and consumers. The vehicle battery and charging system must be investigated before testing the wiring to the affected module. The system supply voltage can be broken out into three types: battery/constant voltage, ignition on voltage and accessories voltage. Power supplies and grounds should be tested at the module in question before suspecting an internal fault within the control module.