Speed Control Switch Correlation Error
Table of contents
- Possible Causes
- How To Fix
- Tech Notes
- Cost To Diagnose
- When is the code detected
- Possible Symptoms
- Description
P0585 JEEP Possible Causes
- Faulty clock spring
- Clock spring harness is open or shorted
- Clock spring circuit poor electrical connection
How do I fix code P0585 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- This code can be set if two different control buttons in the cruise control system are press at the same time for more than 450 milliseconds. Since it is a logical problem and not a mechanical problem, try resetting the light first before replacing any parts.
Cost of diagnosing the P0585 JEEP code
The cost of diagnosing the P0585 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The ECM compares the cruise control switch 1 to switch 2- A signal error was recognized
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Cruise control system inoperative
P0585 JEEP Description
The Engine Control Module (ECM) monitors the Cruise Control System. The ECM sets the OBDII code when the Cruise Control System is not to factory specifications.